source: opsi/products/bacula/CLIENT_DATA/setup3264.ins@ 1022

Last change on this file since 1022 was 1022, checked in by joergs, on Jul 2, 2012 at 8:21:08 PM

inital

File size: 10.1 KB
Line 
1; Copyright (c) uib gmbh (www.uib.de)
2; This sourcecode is owned by uib
3; and published under the Terms of the General Public License.
4; credits: http://www.opsi.org/en/credits/
5
6[Actions]
7requiredWinstVersion >= "4.10.8.6"
8
9DefVar $MsiId32$
10DefVar $UninstallProgram32$
11DefVar $MsiId64$
12DefVar $UninstallProgram64$
13DefVar $LogDir$
14DefVar $ProductId$
15DefVar $ProductVer$
16DefVar $MinimumSpace$
17DefVar $InstallDir32$
18DefVar $InstallDir64$
19DefVar $ExitCode$
20DefVar $LicenseRequired$
21DefVar $LicenseKey$
22DefVar $LicensePool$
23DefVar $INST_SystemType$
24DefVar $INST_architecture$
25
26Set $INST_SystemType$ = GetSystemType
27set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
28
29
30Set $LogDir$ = "%SystemDrive%\tmp"
31
32; ----------------------------------------------------------------
33; - Please edit the following values -
34; ----------------------------------------------------------------
35;$ProductId$ should be the name of the product in opsi
36; therefore please: only lower letters, no umlauts,
37; no white space use '-' as a seperator
38Set $ProductId$ = "bacula"
39Set $ProductVer$ = "5.2.10"
40Set $MinimumSpace$ = "20 MB"
41; the path were we find the product after the installation
42Set $InstallDir32$ = "%ProgramFiles32Dir%\<path to the product>"
43Set $InstallDir64$ = "%ProgramFiles64Dir%\<path to the product>"
44Set $LicenseRequired$ = "false"
45Set $LicensePool$ = "p_" + $ProductId$
46; ----------------------------------------------------------------
47
48if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
49 LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
50 isFatalError
51 ; Stop process and set installation status to failed
52else
53 comment "Show product picture"
54 ShowBitmap "%ScriptPath%\logo.png" $ProductId$
55
56 if FileExists("%ScriptPath%\delsub3264.ins")
57 comment "Start uninstall sub section"
58 Sub "%ScriptPath%\delsub3264.ins"
59 endif
60
61 ;if $LicenseRequired$ = "true"
62 ; comment "Licensing required, reserve license and get license key"
63 ; Sub_get_licensekey
64 ;endif
65
66 comment "installing"
67
68 if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
69 Message "Installing " + $ProductId$ + " 32 Bit..."
70 comment "Start setup program"
71 Winbatch_install_32
72 Sub_check_exitcode
73 ;comment "Copy files"
74 ;Files_install_32 /32Bit
75 ;comment "Patch Registry"
76 ;Registry_install /32Bit
77 ;comment "Create shortcuts"
78 ;LinkFolder_install
79 endif
80
81 if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
82 Message "Installing " + $ProductId$ + " 64 Bit..."
83 comment "Start setup program"
84 Winbatch_install_64
85 Sub_check_exitcode
86 ;comment "Copy files"
87 ;Files_install_64 /64Bit
88 ;comment "Patch Registry"
89 ;Registry_install /64Bit
90 ;comment "Create shortcuts"
91 ;LinkFolder_install
92 endif
93
94endif
95
96[Winbatch_install_32]
97; Choose one of the following examples as basis for your installation
98; You can use $LicenseKey$ var to pass a license key to the installer
99;
100; === Nullsoft Scriptable Install System ================================================================
101; "%ScriptPath%\Setup.exe" /S
102;
103; === MSI package =======================================================================================
104; You may use the parameter PIDKEY=$Licensekey$
105; msiexec /i "%ScriptPath%\some.msi" /l* "$LogDir$\$ProductId$.install_log.txt" /qb! ALLUSERS=2 REBOOT=ReallySuppress
106;
107; === InstallShield + MSI=====================================================================================
108; Attention: The path to the log file should not contain any whitespaces
109; "%ScriptPath%\setup.exe" /s /v" /l* $LogDir$\$ProductId$.install_log.txt /qb! ALLUSERS=2 REBOOT=ReallySuppress"
110; "%ScriptPath%\setup.exe" /s /v" /qb! ALLUSERS=2 REBOOT=ReallySuppress"
111;
112; === InstallShield =====================================================================================
113; Create setup.iss answer file by running: setup.exe /r /f1"c:\setup.iss"
114; "%ScriptPath%\setup.exe" /s /sms /f1"%ScriptPath%\setup.iss" /f2"$LogDir$\$ProductId$.install_log.txt"
115;
116; === Inno Setup ========================================================================================
117; http://unattended.sourceforge.net/InnoSetup_Switches_ExitCodes.html
118; You may create setup answer file by: setup.exe /SAVEINF="filename"
119; You may use an answer file by the parameter /LOADINF="filename"
120; "%ScriptPath%\setup.exe" /sp- /silent /norestart /nocancel /SUPPRESSMSGBOXES
121
122"%ScriptPath%\data\bacula-win32-$ProductVer$.exe" /S
123
124
125
126[Files_install_32]
127; Example of recursively copying some files into the installation directory:
128;
129; copy -s "%ScriptPath%\files\*.*" "$InstallDir32$"
130
131[Winbatch_install_64]
132; Choose one of the following examples as basis for your installation
133; You can use $LicenseKey$ var to pass a license key to the installer
134;
135; === Nullsoft Scriptable Install System ================================================================
136; "%ScriptPath%\Setup.exe" /S
137;
138; === MSI package =======================================================================================
139; You may use the parameter PIDKEY=$Licensekey$
140; msiexec /i "%ScriptPath%\some.msi" /l* "$LogDir$\$ProductId$.install_log.txt" /qb! ALLUSERS=2 REBOOT=ReallySuppress
141;
142; === InstallShield + MSI=====================================================================================
143; Attention: The path to the log file should not contain any whitespaces
144; "%ScriptPath%\setup.exe" /s /v" /l* $LogDir$\$ProductId$.install_log.txt /qb! ALLUSERS=2 REBOOT=ReallySuppress"
145; "%ScriptPath%\setup.exe" /s /v" /qb! ALLUSERS=2 REBOOT=ReallySuppress"
146;
147; === InstallShield =====================================================================================
148; Create setup.iss answer file by running: setup.exe /r /f1"c:\setup.iss"
149; "%ScriptPath%\setup.exe" /s /sms /f1"%ScriptPath%\setup.iss" /f2"$LogDir$\$ProductId$.install_log.txt"
150;
151; === Inno Setup ========================================================================================
152; http://unattended.sourceforge.net/InnoSetup_Switches_ExitCodes.html
153; You may create setup answer file by: setup.exe /SAVEINF="filename"
154; You may use an answer file by the parameter /LOADINF="filename"
155; "%ScriptPath%\setup.exe" /sp- /silent /norestart /nocancel /SUPPRESSMSGBOXES
156
157"%ScriptPath%\data\bacula-win64-$ProductVer$.exe" /S
158
159
160
161[Files_install_64]
162; Example of recursively copying some files into the installation directory:
163;
164; copy -s "%ScriptPath%\files\*.*" "$InstallDir64$"
165
166[Registry_install]
167; Example of setting some values of an registry key:
168;
169; openkey [HKEY_LOCAL_MACHINE\Software\$ProductId$]
170; set "name1" = "some string value"
171; set "name2" = REG_DWORD:0001
172; set "name3" = REG_BINARY:00 af 99 cd
173
174[LinkFolder_install]
175; Example of deleting a folder from AllUsers startmenu:
176;
177; set_basefolder common_programs
178; delete_subfolder $ProductId$
179;
180; Example of creating an shortcut to the installed exe in AllUsers startmenu:
181;
182; set_basefolder common_programs
183; set_subfolder $ProductId$
184;
185; set_link
186; name: $ProductId$
187; target: <path to the program>
188; parameters:
189; working_dir: $InstallDir$
190; icon_file:
191; icon_index:
192; end_link
193;
194; Example of creating an shortcut to the installed exe on AllUsers desktop:
195;
196; set_basefolder common_desktopdirectory
197; set_subfolder ""
198;
199; set_link
200; name: $ProductId$
201; target: <path to the program>
202; parameters: <some_param>
203; working_dir: $InstallDir$
204; icon_file: <path to icon file>
205; icon_index: 2
206; end_link
207
208[Sub_get_licensekey]
209comment "License management is enabled and will be used"
210
211comment "Trying to get a license key"
212Set $LicenseKey$ = demandLicenseKey ($LicensePool$)
213; If there is an assignment of exactly one licensepool to the product the following call is possible:
214; Set $LicenseKey$ = demandLicenseKey ("", $ProductId$)
215;
216; If there is an assignment of a license pool to a windows software id, it is possible to use:
217; DefVar $WindowsSoftwareId$
218; $WindowsSoftwareId$ = "..."
219; Set $LicenseKey$ = demandLicenseKey ("", "", $WindowsSoftwareId$)
220
221DefVar $ServiceErrorClass$
222set $ServiceErrorClass$ = getLastServiceErrorClass
223comment "Error class: " + $ServiceErrorClass$
224
225if $ServiceErrorClass$ = "None"
226 comment "Everything fine, we got the license key '" + $LicenseKey$ + "'"
227else
228 if $ServiceErrorClass$ = "LicenseConfigurationError"
229 LogError "Fatal: license configuration must be corrected"
230 LogError getLastServiceErrorMessage
231 isFatalError
232 else
233 if $ServiceErrorClass$ = "LicenseMissingError"
234 LogError "Fatal: required license is not supplied"
235 isFatalError
236 endif
237 endif
238endif
239
240[Sub_check_exitcode]
241comment "Test for installation success via exit code"
242set $ExitCode$ = getLastExitCode
243; informations to exit codes see
244; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
245; http://msdn.microsoft.com/en-us/library/aa368542.aspx
246if ($ExitCode$ = "0")
247 comment "Looks good: setup program gives exitcode zero"
248else
249 comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
250 if ($ExitCode$ = "1605")
251 comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed."
252 comment "Uninstall of a not installed product failed - no problem"
253 else
254 if ($ExitCode$ = "1641")
255 comment "looks good: setup program gives exitcode 1641"
256 comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success."
257 else
258 if ($ExitCode$ = "3010")
259 comment "looks good: setup program gives exitcode 3010"
260 comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success."
261 else
262 logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
263 isFatalError
264 endif
265 endif
266 endif
267endif
268
Note: See TracBrowser for help on using the repository browser.