source: opsi/products/bacula/CLIENT_DATA/setup3264.ins@ 1261

; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/en/credits/

[Actions]
requiredWinstVersion >= "4.10.8.6"

DefVar $MsiId32$
DefVar $UninstallProgram32$
DefVar $MsiId64$
DefVar $UninstallProgram64$
DefVar $LogDir$
DefVar $ProductId$  
DefVar $ProductVer$  
DefVar $MinimumSpace$
DefVar $InstallDir$
DefVar $InstallDir32$
DefVar $InstallDir64$
DefVar $InstallDirOpsi$ 
DefVar $ExitCode$
DefVar $LicenseRequired$
DefVar $LicenseKey$
DefVar $LicensePool$
DefVar $INST_SystemType$
DefVar $INST_NTVersion$
DefVar $INST_architecture$

DefVar $catalog$
DefVar $filedaemon_full_name$
DefVar $filedaemon_full_password$
DefVar $filedaemon_monitor_name$
DefVar $filedaemon_monitor_password$
DefVar $director_name$
DefVar $director_address$
DefVar $director_password$


Set $INST_SystemType$   = GetSystemType
set $INST_NTVersion$    = GetMsVersionInfo
set $INST_architecture$ = GetProductProperty("install_architecture","system specific")

set $catalog$ = GetProductProperty( "catalog", "MyCatalog" )
set $filedaemon_full_name$ = GetProductProperty( "filedaemon_full_name", "" )
set $filedaemon_full_password$ = GetProductProperty( "filedaemon_full_password", "filedaemon_full_password" )
set $filedaemon_monitor_name$ = GetProductProperty( "filedaemon_monitor_name", "" )
set $filedaemon_monitor_password$ = GetProductProperty( "filedaemon_monitor_password", "filedaemon_monitor_password" )
set $director_name$ = GetProductProperty( "director_name", "director_name" )
set $director_address$ = GetProductProperty( "director_address", "director_address.example.com" )
set $director_password$ = GetProductProperty( "director_password", "director_password" )

Set $LogDir$ = "%SystemDrive%\tmp"

; ----------------------------------------------------------------
; - Please edit the following values                             -
; ----------------------------------------------------------------
;$ProductId$ should be the name of the product in opsi
; therefore please: only lower letters, no umlauts, 
; no white space use '-' as a seperator
Set $ProductId$       = "bacula"
Set $ProductVer$      = "5.2.10"
Set $MinimumSpace$    = "30 MB"
; the path were we find the product after the installation
Set $InstallDir$        = "%ProgramFilesDir%\Bacula"
Set $InstallDir32$      = "%ProgramFiles32Dir%\Bacula"
Set $InstallDir64$      = "%ProgramFiles64Dir%\Bacula"
; opsi requires path seperation by "\\" instead of "\"
Set $InstallDirOpsi$    = composeString( splitString ( $InstallDir$, "\"), "\\" )
Set $LicenseRequired$ = "false"
Set $LicensePool$     = "p_" + $ProductId$
; ----------------------------------------------------------------

if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
        LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
        isFatalError
        ; Stop process and set installation status to failed
endif

comment "Show product picture"
ShowBitmap "%ScriptPath%\logo.png" $ProductId$

if FileExists("%ScriptPath%\delsub3264.ins")
    comment "Start uninstall sub section"
    Sub "%ScriptPath%\delsub3264.ins"
endif

;if $LicenseRequired$ = "true"
;       comment "Licensing required, reserve license and get license key"
;       Sub_get_licensekey
;endif

comment "installing"

if $filedaemon_full_name$ = ""
    set $filedaemon_full_name$    = "%HostID%-fd"
    opsiservicecall_set_product_property_filedaemon_full_name
endif

if $filedaemon_monitor_name$ = ""
    set $filedaemon_monitor_name$ = "%HostID%-mon"
    opsiservicecall_set_product_property_filedaemon_monitor_name
endif


if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
    Message "Installing " + $ProductId$ + " 32 Bit..."
    comment "Start setup program"
    Winbatch_install_32
    Sub_check_exitcode
    ;comment "Copy files"
    ;Files_install_32 /32Bit
    ;comment "Patch Registry"
    ;Registry_install /32Bit
    ;comment "Create shortcuts"
    ;LinkFolder_install
endif

if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
    Message "Installing " + $ProductId$ + " 64 Bit..."
    comment "Start setup program"
    Winbatch_install_64
    Sub_check_exitcode
    ;comment "Copy files"
    ;Files_install_64 /64Bit
    ;comment "Patch Registry"
    ;Registry_install /64Bit
    ;comment "Create shortcuts"
    ;LinkFolder_install
endif

;Patches_bacula_conf $InstallDir$+"\bacula-fd.conf"
DosBatch_bacula-fd.conf
DosBatch_bconsole.conf
DosBatch_bat.conf
DosBatch_tray-monitor.conf
; some config files are expected in %CommonAppdataDir%\Bacula\
Files_copy_conf

if ($INST_NTVersion$ >= "6.0")
        DosBatch_open_firewall_nt6
else
        DosBatch_open_firewall
endif

; start FD immediatly, not only after reboot
DosBatch_start_bacula-fd

;
; end
;



; winbatch installer:
; /S silent installl
; /D destination path 
;       use this, otherwise it installs to "program files" for all languages.
;       don't use " around argument, otherwise argument is ignored

[Winbatch_install_32]
"%ScriptPath%\data\bacula-win32-$ProductVer$.exe" /S /D=$InstallDir32$

[Winbatch_install_64]
"%ScriptPath%\data\bacula-win64-$ProductVer$.exe" /S /D=$InstallDir64$

[DosBatch_bacula-fd.conf]
(
echo #
echo # managed by opsi
echo #
echo # "Global" File daemon configuration specifications
echo #
echo FileDaemon {                            # this is me
echo   Name                    = "$filedaemon_full_name$"
echo   FDport                  = 9102                # where we listen for the director
echo   WorkingDirectory        = "$InstallDirOpsi$\\working"
echo   Pid Directory           = "$InstallDirOpsi$\\working"
echo   Plugin Directory        = "$InstallDirOpsi$\\plugins"
echo   Maximum Concurrent Jobs = 10
echo }
;echo 
echo #
echo # List Directors who are permitted to contact this File daemon
echo #
echo Director {
echo   Name     = "$director_name$"
echo   Password = "$filedaemon_full_password$"
echo }
;echo 
echo #
echo # Restricted Director, used by tray-monitor to get the
echo #   status of the file daemon
echo #
echo Director {
echo   Name     = "$filedaemon_monitor_name$"
echo   Password = "$filedaemon_monitor_password$"
echo   Monitor  = yes
echo }
;echo 
echo # Send all messages except skipped files back to Director
echo Messages {
echo   Name = Standard
echo   director = $director_name$ = all, !skipped, !restored
echo }
) > $InstallDir$/bacula-fd.conf



[DosBatch_bconsole.conf]
(
echo #
echo # managed by opsi
echo #
echo Director {
echo   Name        = "$director_name$"
echo   Address     = "$director_address$"
echo   DIRport     = 9101
echo   Password    = "$director_password$"
echo }
) > $InstallDir$/bconsole.conf



[DosBatch_bat.conf]
(
echo #
echo # managed by opsi
echo #
echo Director {
echo   Name        = "$director_name$"
echo   Address     = "$director_address$"
echo   DIRport     = 9101
echo   Password    = "$director_password$"
echo }
) > $InstallDir$/bat.conf



[DosBatch_tray-monitor.conf]
(
echo #
echo # managed by opsi
echo #
echo Monitor {
echo   Name            = "$filedaemon_monitor_name$"
echo   Password        = "$filedaemon_monitor_password$"
echo   RefreshInterval = 30 seconds
echo }
;echo
echo Client {
echo   Name            = "$filedaemon_full_name$"
echo   Address         = localhost
echo   FDport          = 9102
echo   Password        = "$filedaemon_monitor_password$"
echo }
) > $InstallDir$/tray-monitor.conf



[DosBatch_open_firewall]
netsh firewall add portopening protocol=TCP port=9102 name=bacula-fd-port

[DosBatch_open_firewall_nt6]
netsh advfirewall firewall add rule name="bacula-fd-port" dir=in action=allow protocol=TCP localport=9102

[DosBatch_start_bacula-fd]
net start bacula-fd

[opsiservicecall_set_product_property_filedaemon_full_name]
"method": "setProductProperty",
"params": [
        'bacula',
        'filedaemon_full_name',
        '$filedaemon_full_name$',
        '%HostID%'
]

[opsiservicecall_set_product_property_filedaemon_monitor_name]
"method": "setProductProperty",
"params": [
        'bacula',
        'filedaemon_monitor_name',
        '$filedaemon_monitor_name$',
        '%HostID%'
]


[Files_copy_conf]
copy "$InstallDir$\*.conf" "%CommonAppdataDir%\Bacula\"


[Files_install_32]
; Example of recursively copying some files into the installation directory:
;
; copy -s "%ScriptPath%\files\*.*" "$InstallDir32$"

[Files_install_64]
; Example of recursively copying some files into the installation directory:
;
; copy -s "%ScriptPath%\files\*.*" "$InstallDir64$"

[Registry_install]
; Example of setting some values of an registry key:
;
; openkey [HKEY_LOCAL_MACHINE\Software\$ProductId$]
; set "name1" = "some string value"
; set "name2" = REG_DWORD:0001
; set "name3" = REG_BINARY:00 af 99 cd

[LinkFolder_install]
; Example of deleting a folder from AllUsers startmenu:
;
; set_basefolder common_programs
; delete_subfolder $ProductId$
;
; Example of creating an shortcut to the installed exe in AllUsers startmenu:
;
; set_basefolder common_programs
; set_subfolder $ProductId$
;
; set_link
;       name: $ProductId$
;       target: <path to the program>
;       parameters:
;       working_dir: $InstallDir$
;       icon_file:
;       icon_index:
; end_link
;
; Example of creating an shortcut to the installed exe on AllUsers desktop:
;
; set_basefolder common_desktopdirectory
; set_subfolder ""
;
; set_link
;       name: $ProductId$
;       target: <path to the program>
;       parameters: <some_param>
;       working_dir: $InstallDir$
;       icon_file: <path to icon file>
;       icon_index: 2
; end_link

[Sub_get_licensekey]
comment "License management is enabled and will be used"

comment "Trying to get a license key"
Set $LicenseKey$ = demandLicenseKey ($LicensePool$)
; If there is an assignment of exactly one licensepool to the product the following call is possible:
; Set $LicenseKey$ = demandLicenseKey ("", $ProductId$)
;
; If there is an assignment of a license pool to a windows software id, it is possible to use:
; DefVar $WindowsSoftwareId$
; $WindowsSoftwareId$ = "..."
; Set $LicenseKey$ = demandLicenseKey ("", "", $WindowsSoftwareId$)

DefVar $ServiceErrorClass$
set $ServiceErrorClass$ = getLastServiceErrorClass
comment "Error class: " + $ServiceErrorClass$

if $ServiceErrorClass$ = "None"
        comment "Everything fine, we got the license key '" + $LicenseKey$ + "'"
else
        if $ServiceErrorClass$ = "LicenseConfigurationError"
                LogError "Fatal: license configuration must be corrected"
                LogError getLastServiceErrorMessage
                isFatalError
        else 
                if $ServiceErrorClass$ = "LicenseMissingError"
                        LogError "Fatal: required license is not supplied"
                        isFatalError
                endif
        endif
endif

[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
        comment "Looks good: setup program gives exitcode zero"
else
        comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
        if ($ExitCode$ = "1605")
                comment "ERROR_UNKNOWN_PRODUCT  1605    This action is only valid for products that are currently installed."
                comment "Uninstall of a not installed product failed - no problem"
        else
                if ($ExitCode$ = "1641")
                        comment "looks good: setup program gives exitcode 1641"
                        comment "ERROR_SUCCESS_REBOOT_INITIATED 1641    The installer has initiated a restart. This message is indicative of a success."
                else
                        if ($ExitCode$ = "3010")
                                comment "looks good: setup program gives exitcode 3010"
                                comment "ERROR_SUCCESS_REBOOT_REQUIRED  3010    A restart is required to complete the install. This message is indicative of a success."
                        else
                                logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
                                isFatalError
                        endif
                endif
        endif
endif