source: trunk/technical/common/build/build.sh@ 712

Last change on this file since 712 was 712, checked in by joergs, on Oct 28, 2005 at 2:28:47 PM

adapted for SL 10.0

  • Property svn:executable set to *
  • Property svn:keywords set to Id LastChangedDate LastChangedRevision
File size: 7.7 KB
Line 
1#!/bin/bash
2# build script
3#
4# $Id: build.sh 712 2005-10-28 12:28:47Z joergs $
5#
6# builds RPM in an clean chroot build environment.
7# uses the Suse build script.
8#
9# without parameter, it checks the directory for the files
10# SOURCES or SPECSOURCES.
11# The files definied in there are copied to the
12# build system.
13#
14# when used with parameter,
15# this parameter is expected to be a source rpm
16#
17# config file:
18# /usr/local/etc/build
19# lists the sources for the different distributions
20#
21# the rest is controlled by environment variables
22#
23# build.sh uses sudo su. /etc/sudoers needs a line like:
24# %users ALL=(ALL) NOPASSWD: /bin/su
25# for automatic building
26#
27# return codes:
28# 0: success
29# 1: skipped (current RPM already in dest dir)
30# >1: error
31#
32# RPM releases are set
33# to the svn version number of the project directory.
34# Modifiers are:
35# m: release + local modifications
36# p: release + submited modifications. svn update project directory is needed
37
38
39
40
41CONFIG_FILE=/usr/local/etc/build
42BUILD_CMD=build
43BUILDUSER=$USER
44
45[ -z "$BUILD_MODE" ] && BUILD_MODE="--verify"
46[ -z "$BUILD_DIST" ] && BUILD_DIST="sles9-i386"
47[ -z "$BUILD_ROOT" ] && BUILD_ROOT="/var/tmp/buildsystem.$USER.$BUILD_DIST"
48[ -z "$BUILD_PREPARE_SPEC" ] && BUILD_PREPARE_SPEC="no"
49
50[ -z $DEST_DIR ] && DEST_DIR="/tmp/build.$BUILDUSER"
51BUILDTEMP=$DEST_DIR/buildsrc/
52BUILDSCRIPT=$BUILDTEMP/buildscript.$$
53
54[ -z "$BUILD_USES_SVN" ] && BUILD_USES_SVN="yes"
55
56
57
58if [ -r $CONFIG_FILE ]; then
59 source $CONFIG_FILE
60 MOD_BUILD_DIST=`echo $BUILD_DIST | sed "s/[-+.]/_/g"`
61 #echo MOD_BUILD_DIST: $MOD_BUILD_DIST
62 #RPMS_PATHS=$[BUILD_RPMS_$MOD_BUILD_DIST]
63 #echo RPMS_PATHS: $RPM_PATHS
64 #if [ -n "$[BUILD_RPMS_$MOD_BUILD_DIST]" ]; then
65 # BUILD_RPMS=$[BUILD_RPMS_$MOD_BUILD_DIST]
66 #fi
67 #echo OUTPUT: $[BUILD_RPMS_$MOD_BUILD_DIST]
68 #:$BUILD_RPMS
69 case "$BUILD_DIST" in
70 "9.0-i386")
71 BUILD_RPMS_TEST=$BUILD_RPMS_9_0_i386 ;;
72 "sles8-i386")
73 BUILD_RPMS_TEST=$BUILD_RPMS_sles8_i386 ;;
74 "sles8-i386+update")
75 BUILD_RPMS_TEST=$BUILD_RPMS_sles8_i386_update ;;
76 "9.1-i386")
77 BUILD_RPMS_TEST=$BUILD_RPMS_9_1_i386 ;;
78 "sles9-i386")
79 BUILD_RPMS_TEST=$BUILD_RPMS_sles9_i386 ;;
80 "9.2-i386")
81 BUILD_RPMS_TEST=$BUILD_RPMS_9_2_i386 ;;
82 "9.3-i386")
83 BUILD_RPMS_TEST=$BUILD_RPMS_9_3_i386 ;;
84 "10.0-i386")
85 BUILD_RPMS_TEST=$BUILD_RPMS_10_0_i386 ;;
86 esac
87 if [ "$BUILD_RPMS_TEST" ]; then
88 if [ "$BUILD_RPMS" ]; then
89 BUILD_RPMS=$BUILD_RPMS:$BUILD_RPMS_TEST
90 else
91 BUILD_RPMS=$BUILD_RPMS_TEST
92 fi
93 fi
94fi
95
96echo BUILD_RPMS: $BUILD_RPMS
97
98ERROR=0
99
100# Hier gehts los:
101
102if [ -z "$1" ]; then
103 # without parameter, we are in source directory
104 SPECFILE=$(ls *.spec | awk '{print $1}')
105 PACKAGE=$(awk '/^Name:/ {print $2}' <$SPECFILE)
106 VERSION=$(awk '/^Version:/ {print $2}' <$SPECFILE)
107else
108 # parameter is src.rpm file
109 PACKAGE=`echo $1 | sed 's/-[0-9]*\..*.src.rpm//'`
110 VERSION=`echo $1 | sed 's/.*-\([0-9]*\..*\)-.*.src.rpm/\1/'`
111fi
112
113echo $PACKAGE $VERSION $BUILD_DIST $BUILD_MODE
114
115rm -rf ${BUILDTEMP}/src/${PACKAGE};
116mkdir -p ${BUILDTEMP}/src/${PACKAGE}
117# ${BUILDTEMP}/${BUILD_DIST};
118
119if [ "$1" ]; then
120 EXPECTED_DEST_RPM_FILENAME=${DEST_DIR}/${BUILD_DIST}/`echo $1 | sed 's/\.src\./.*./'`
121 if [ -f $EXPECTED_DEST_RPM_FILENAME ]; then
122 echo
123 echo "Build of \"${PACKAGE}\" unnecessary. Current RPM already at " $EXPECTED_DEST_RPM_FILENAME
124 echo
125 exit 1
126 else
127 cp -a "$1" ${BUILDTEMP}/src/${PACKAGE}
128 cd ${BUILDTEMP}/src/${PACKAGE}; rpm2cpio $1 | cpio -i
129 fi
130else
131 cp -a $SPECFILE ${BUILDTEMP}/src/${PACKAGE}
132
133 # uses Subversion (svn) to generate more information for the RPM
134 if [ "$BUILD_USES_SVN" = "yes" ]; then
135 echo "receiving subversion information ..."
136 # set RELEASE number (last modification in this directory)
137 # requires subversion (but connection to server isn't neccessary)
138 SVN_BUILD_RELEASE=$(unset LANG; svn info . | sed -n 's/^Last Changed Rev: \([0-9]*\)/\1/p')
139 # in case of local modification a "m" is added to the release number
140 SVN_BUILD_MODIFIED=$(svn status -v | grep "^ *M" | wc -l)
141 # checks if a file is commited,
142 # but update on its directory is not performed
143 SVN_LAST_MODIFICATION=$(svn status -v | sed -n 's/^ *[0-9]* *\([0-9]*\) .*/\1/p' | sort -n | tail -1)
144 if [ $SVN_BUILD_MODIFIED -gt 0 ]; then
145 SVN_BUILD_RELEASE=${SVN_BUILD_RELEASE}m
146 elif [ $SVN_LAST_MODIFICATION -ne $SVN_BUILD_RELEASE ]; then
147 SVN_BUILD_RELEASE=${SVN_BUILD_RELEASE}p
148 else # check if RPM has been build already
149 EXPECTED_DEST_RPM_FILENAME=${DEST_DIR}/${BUILD_DIST}/${PACKAGE}-${VERSION}-${SVN_BUILD_RELEASE}.*.rpm
150 if [ -f $EXPECTED_DEST_RPM_FILENAME ]; then
151 echo
152 echo "Build of \"${PACKAGE}\" unnecessary. Current RPM already at " $EXPECTED_DEST_RPM_FILENAME
153 echo
154 exit 1
155 fi
156 fi
157 if [ "$SVN_BUILD_RELEASE" ]; then
158 sed "s/^Release:.*/Release: $SVN_BUILD_RELEASE/g" $SPECFILE > ${BUILDTEMP}/src/${PACKAGE}/$SPECFILE
159 fi
160 echo "SVN_BUILD_RELEASE: $SVN_BUILD_RELEASE"
161
162 # changelog header
163 DATE=`unset LANG; date +"%a %b %d %Y"`
164 echo -e "* $DATE -\n" > Changes
165 echo "- Subversion status:" >> Changes
166 # additional infos for the Changes file (see if everything is checked in)
167 svn status -v | grep -v '^? ' >> Changes
168 echo >> Changes
169 echo "- ChangeLog:" >> Changes
170 # requires connection to the subversion server
171 svn log -v . > ChangeLog.new && mv ChangeLog.new ChangeLog
172 cat ChangeLog >> Changes
173
174 # if there is no changelog section in the spec file,
175 # also append the Changes there
176 if ! grep -q "%changelog" $SPECFILE ; then
177 # paste "Changes" into SPEC file.
178 echo "%changelog" >> ${BUILDTEMP}/src/${PACKAGE}/$SPECFILE
179 # without trailing *, except for the initial
180 echo -n "*" >> ${BUILDTEMP}/src/${PACKAGE}/$SPECFILE
181 cat Changes | sed 's/\(^[\*]\+\)//g' >> ${BUILDTEMP}/src/${PACKAGE}/$SPECFILE
182 fi
183 fi
184 # just make sure, that the Changes file exist
185 touch Changes
186
187 # if "SOURCES" file exist, create tar file on the fly
188 if [ -r "SOURCES" ]; then
189 # create a tar file from the sources
190 tar cvjf ${BUILDTEMP}/src/${PACKAGE}/$PACKAGE-$VERSION.tar.bz2 --files-from SOURCES --exclude .svn --exclude "*~"
191
192 elif [ -r "SPECSOURCES" ]; then
193 # SPECSOURCES has to list the files
194 # that are referenced in the .spec file
195 # these files are copied to the build environment
196 cp -av `cat SPECSOURCES` ${BUILDTEMP}/src/${PACKAGE}
197
198 else
199 # legacy method:
200 # call the existing Makefile
201 # to generate a tar file
202 test -e Makefile && make
203 TARFILE=$(ls *.tar.[gb]z*| awk '{print $1}')
204 cp -av $TARFILE ${BUILDTEMP}/src/${PACKAGE}
205 fi
206fi
207
208# create buildscript
209cat > $BUILDSCRIPT <<EOF
210#!/bin/bash
211# local buildscript
212export BUILD_ROOT=$BUILD_ROOT
213export BUILD_DIST=$BUILD_DIST
214export BUILD_RPMS=${DEST_DIR}/${BUILD_DIST}:$BUILD_RPMS
215export BUILD_PREPARE_SPEC=$BUILD_PREPARE_SPEC
216
217cd ${BUILDTEMP}/src/${PACKAGE}
218$BUILD_CMD $BUILD_MODE
219EOF
220
221chmod a+x $BUILDSCRIPT
222sudo su -c $BUILDSCRIPT
223rm -f $BUILDSCRIPT
224
225mkdir -p ${DEST_DIR}/src
226# delete all old versions of this package
227for i in ${DEST_DIR}/src/${PACKAGE}-*.src.rpm; do
228 if [ -f $i -a ${PACKAGE} = "`rpm -qp --qf "%{NAME}\n" $i`" ]; then
229 rm $i
230 fi
231done
232#rm -f ${DEST_DIR}/src/${PACKAGE}-*.src.rpm
233
234if !(cp -a ${BUILD_ROOT}/usr/src/packages/SRPMS/${PACKAGE}-${VERSION}-*.src.rpm ${DEST_DIR}/src 2> /dev/null); then
235 ERROR=4
236fi
237
238mkdir -p ${DEST_DIR}/${BUILD_DIST}
239# delete all old versions of this package
240for i in ${DEST_DIR}/${BUILD_DIST}/${PACKAGE}-*.rpm; do
241 if [ -f $i -a ${PACKAGE} = "`rpm -qp --qf "%{NAME}\n" $i`" ]; then
242 rm $i
243 fi
244done
245#rm -f ${DEST_DIR}/${BUILD_DIST}/${PACKAGE}-*.rpm
246
247if !(cp -a ${BUILD_ROOT}/usr/src/packages/RPMS/*/${PACKAGE}*${VERSION}-*.*.rpm ${DEST_DIR}/${BUILD_DIST} ); then
248 ERROR=8
249fi
250
251echo
252if [ $ERROR -ne 0 ]; then
253
254 echo "ERROR while building packet $PACKAGE";
255else
256 echo "Build of \"${PACKAGE}\" completed!"
257 echo "Packages can be found in ${DEST_DIR}"
258fi
259echo
260
261exit $ERROR
Note: See TracBrowser for help on using the repository browser.