dasscm

dass configuration managment (dasscm) is a simple solution for managing system configuration file with Subversion. It is favored because of its easy setup and low footsprint. It can be easily integrated into Nagios monitoring.

Naming

It is not always easy to get the context of eg. repository, because it can mean "server side svn repository", "package repository", like "RPM repository" or sometimes also your local svn ckeckout. To distinguish between the different terms, we try to use the following terms in a consistent way:

target system	the system were dasscm is installed and used
Subverson server	the system were your SVN repository is hosted
system files	config and other files on your system, like /etc/ntp.conf
system files managed by dasscm	the part of your system files that has already been checked in to Subversion via dasscm
local svn checkout	your local svn checkout on the target system
svn repository	the Subversion repository were the "system files managed by dasscm" are versioned
package repository	the installation source repository for dasscm

Repository

package repositories (RPM and DEB)	​http://download.opensuse.org/repositories/home:/dassit/
source code	source:dasscm/trunk​

About

dasscm is a wrapper Perl script around the svn command. If you're planing to check-in your system configuration files into a Subversion repository, dasscm eases your life.

Instead of copying files from the system to the corresponding local subversion checkout directory and commit them there, you just use:

dasscm login
dasscm add /etc/ntp.conf

Missing directories are added automatically.

But the real advantage, compared to plain svn is, that there is the possibility to check, if your local system files have changed against the repository. Just call:

dasscm status

For Nagios NRPE integration use

dasscm check

Usage

Subcommands

dasscm suppots following subcommands:

help
init
login <username>
up <path>
ls <path>
add <path>
commit <path>
revert <path>
diff <path>
status <path>
check
cleanup
permissions

Pre-Requirements

• an existing empty directory in a subversion repository. Normally you create a new directory of every dasscm installation (like ​http://mysubversionserver/config/HOSTNAME)
• a user with read permissions to this subversion repository. The username dasscm is a good choice

Configuration

After installing it is required to configure dasscm. All configuration changes have to be done in the file /etc/dasscm.conf

#
# dasscm configuration
#

#
# TODO:
# - set unique DASSCM_REPOSITORY_NAME.
#   Normally use the full qualified hostname
# - for security reasons, it is recommended
#   to set DASSCM_CHECKOUT_USERNAME and DASSCM_CHECKOUT_PASSWORD
#   individually (maybe host specific)
#

# 
# host specific name
# it is required, to set this unique
# normally, use the result of `hostname -f`
#
DASSCM_REPOSITORY_NAME=

#
# local base directory
#
DASSCM_LOCAL_REPOSITORY_BASE=/var/lib/dasscm/

#
# subversion server settings
# 
#DASSCM_SVN_REPOSITORY_BASE=https://svn.dass-it/svn/internal-dasscm/
#DASSCM_CHECKOUT_USERNAME=dasscm
#DASSCM_CHECKOUT_PASSWORD=

#
# file to store the permissions of the checked-in file
# 
DASSCM_PERMISSION_FILE="/etc/permissions.d/dasscm.permission_backup"

Set the following variables according to your needs:

DASSCM_REPOSITORY_NAME=system-name	normally hostname -f
DASSCM_CHECKOUT_USERNAME=dasscm	subversion user with read-only permissions
DASSCM_CHECKOUT_PASSWORD=dasscm-password	subversion password for $DASSCM_CHECKOUT_USERNAME
DASSCM_SVN_REPOSITORY_BASE=http://your-svn-repository/path/	subversion directory in which the $DASSCM_REPOSITORY_NAME directory is located

If it not already exists, you can create your subversion subdirectory by

source /etc/dasscm.conf
svn mkdir -m "initial" --no-auth-cache $DASSCM_SVN_REPOSITORY_BASE/$DASSCM_REPOSITORY_NAME

login

For convinience use

dasscm login

This opens a shell, where the environment is set to the required values.

add files/directories

For example cups configuration

# it is recommended to check initially check a file before you first edit it. Use the comment "orig"
dasscm add -m "orig" /etc/sysconfig/cups
# make you changes to /etc/sysconfig/cups
dasscm commit -m "my comment about my change" /etc/sysconfig/cups

checkin modified files

dasscm commit -m "my comment about my change" /etc/sysconfig/cups

Note: every "add" also calls "commit", so the command "commit" is not really required

status

dasscm status

store file permissions

on every call of dasscm add/commit als file permissions are evaluated and stored in the file

/etc/permissions.d/dasscm.permissions_backup

restore file permissions

On SUSE system:

cp -a /etc/permissions.d/dasscm.permissions_backup /etc/permissions.d/dasscm.permissions
# change all file permissions to the values, that are defined in the file /etc/permissions.d/*.permissions
/sbin/conf.d/SuSEconfig.permissions

diff

dasscm diff $filename

shows the differences of a local system file against the file in the local svn checkout.

revert

If a local system file is modified (see dasscm diff) it can be reverted to the checked in version by

dasscm revert $filename

help

dasscm help

dasscm as non-root user

Hierfür muss die Datei /etc/dasscm.conf lesbar sein und eine sudo Regel für dasscm existieren.

Am besten über eine zentrale Gruppe dasscm (LDAP). Standard GID-Number ist 4199.

warum sudo?

Ohne sudo läßt sich nicht sicherstellen, dass der Benutzer Zugriff auf alle Dateien erhält, die sich im Produktivsystem befinden.

Falls eine Datei keine Leserechte für Other besitzt, kann beim status keine Differenz zwischen dieser Datei und dem Repository ermittelt werden.

Konfiguration

<code bash> getent group dasscm # 4199:*:dasscm:joergs,maik

# Leserechte für die Gruppe dasscm chgrp dasscm /etc/dasscm.conf

# der Gruppe dasscm die Benutzung von dasscm erlauben echo " Defaults env_keep+=DASSCM_USERNAME Defaults env_keep+=DASSCM_PASSWORD dasscm ALL=(ALL) NOPASSWD:/usr/bin/dasscm" >> /etc/sudoers </code>

Benutzung

<code bash> # Anmelden dasscm login

sudo dasscm status

sudo dasscm ls

sudo dasscm add <DATEINAME> </code>

Nagios/NRPE Check

Client-seitige Konfiguration für NRPE

<code bash> # nrpe config file CFG=/etc/nagios/nrpe.cfg

# überprüfen als welcher Benutzer nrpe läuft NRPE_USER=sed -n 's/nrpe_user=//p' $CFG echo "NRPE_USER: $NRPE_USER"

# zu sudoers hinzufügen

grep -q "dasscm check" /etc/sudoers

echo "$NRPE_USER ALL=(ALL) NOPASSWD:/usr/bin/dasscm check" >> /etc/sudoers

# sicherstellen, dass check_dasscm für nrpe definiert ist

grep -q dasscm $CFG

echo "command[check_dasscm]=sudo dasscm check" >> $CFG

# nrpe neu starten /etc/init.d/nrpe restart </code>

Wie schon bei Benutzern beschrieben, wäre der Zugriff auch ohne sudo denkbar. Dann würden aber ggf. nicht alle veränderten Dateien erkannt.

Besonderheit auf RedHat / CentOS

Damit Sudo über nrpe oder ssh funktioniert muss folgende Option in /etc/sudoers/ auskommentiert werden:

# Defaults requiretty

Unter Suse Systemen ist das bereits voreingestellt.

usage (German)

from dasscm/trunk/doc/dasscm_howto.txt​:

Include(source:dasscm/trunk/doc/dasscm_howto.txt, text/plain)